Supports all R&SNRP-Zxx Power Sensors Supports all sensor-dependent measurement. The installer was advised to check all the below causes mentioned. Susceptibility to electromagnetic fields level 3 conforming to IEC 6Įlectrical fast transient/burst immunity test level 4 conforming to IEC 6ġ.2/50 µs shock waves immunity test level 4 conforming to IEC 6Ĭonducted RF disturbances level 3 conforming to IEC 6 Overview: NRP2 Power Meter - The art of measuring power accurately. Whenever there is a connection failure the possible causes could be with the device communication port connection or configuration parameters or device fault. Total voltage harmonic distortion THD (U)ĥ70…999000 V AC 45.65 Hz with external VTĬlass 0.5S active energy conforming to IEC 62053-22Ĭlass 1 active energy conforming to IEC 62053-21Ĭlass 2 reactive energy conforming to IEC 62053-23Ĭlass C active energy conforming to EN 50470-3Įnvironment electromagnetic compatibilityĮlectrostatic discharge level 4 conforming to IEC 6
Total current harmonic distortion THD (I) Product dimensions are as follows: width 3.54 in (90 mm), depth 2.76in (70 mm), height 3.74 in (95 mm) and product weight 9.17 oz (260 g). The meter offers event recording with up to 5 alarms. This meter has no communication input capability. Measurement range between Phase and Neutral is 50 to 330VAC at 45 to 65 Hz. The range of measurement voltage between Phases is 80 to 570VAC at 45 to 65 Hz. Direct measurement range is 50 to 570VAC, with an external VT 570 to 999000VAC. Line rated current for this meter is 1A or 5A input and will support Single Phase, Single Phase and Neutral or Three Phase configurations. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 277VAC, 173 to 480VAC and 100 to 300VDC. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor, Apparent Power, Total Harmonic Distortion and up to 15th Harmonic. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 32 samples per cycle. PM3210 DIN mount energy meter with a 128 by 96 pixel backlit, LCD display.
0 kommentar(er)
